muggy

[p3-28revo]

Has anyone heard anything about the losi muggy, or even have one all the info i can get would be helpfull!!!!:constipat

 

[insomniak]

Has anyone heard anything about the losi muggy, or even have one all the info i can get would be helpfull!!!!:constipat

i recently picked up a used muggy that was totally stock. so far it has ate up a set of clutch bell bearings and tore up the stock alum clutch i believe the bearing failure could have been contributed to all the extra shims i found causing the clutch bell to have no play in it all ,but from what i have read they need upgrades outta the box to be reliable.For handling and power etc its been a great truck I'm just waiting on the new 12t vented clutch bell,dynamite clutch shoes and bearings hoping that will solve some of the problems.i've heard they have a weak chassis as well which will bend like a banana over time with alot of heavy runnin and jumps i will see for myself after i get it runnin again .if u have ne other specific questions ask and i will do my best to answer . i already asked this same question and diddin get much response apparently there arent many muggy owners here except for scrogg( he recently sold his) he may be able to help

 

[p3-28revo]

thanks anything i could do to make the chassis better then

 

[insomniak]

i've looked and and i havent found ne aftermarket skid plates etc but if u check out neweramodels they have a tonne of alum parts also check losi's site for upgrades i ordered a one pc alum motor mount instead of the standard 2 pc when i ordered the other new parts and I'm thinking of picking up an alum steering set and bearings to tighten the front end up a bit I'm kinda new to this and just learning as i go.

 

[p3-28revo]

o tell me how they work after u test them cause my friend and i were thinking about just building so we might just by the upgrades right away if theire worth the money

 

[Zachary]

here's the hardened chassis for you.
http://www.rcslot.com/pc-radio-control-slot-cars/LOSB2275.html

I believe that all the arms and bulk heads and everything is the same as the LST but not 100% sure.

 

[insomniak]

here's the hardened chassis for you.
http://www.rcslot.com/pc-radio-control-slot-cars/LOSB2275.html

I believe that all the arms and bulk heads and everything is the same as the LST but not 100% sure.

thnx Zachary i bookmarked the site for future ref if i end up makin a banana outta this rig when i get my clutch parts

 

[p3-28revo]

thanks zachary i check with my friend and see if he still wants to build one but if we do i think well get the hardened chassis first