Mip cvd ?

[Bkyd Basher]

Hey guys a buddy of mine bought a used tmaxx and it came came with a new set of mip cvd's, but the guy told us they were not the right ones for the truck. All i have is the instruction sheet with a number in the top right{#01-368 8/00 but i can't match that to anything i can find. Any suggestions or info?

 

[Nitro4910]

What model maxx do you have?


Got a pic of the MIP CVD?

 

[Bkyd Basher]

i believe its the 4910, maybe the classic originally 2.5 now 3.3. I dont have a way to put picks on yet. But could u maybe tell me the difference from the 3.3 to the 2.5 cvds? is it just the length?

 

[Nitro4910]

It has to do with the length & the stub axle ends.
The 4910 takes the same 6x12mm bearings for both the inner & outer carrier bearings.
The 4909/08/07 has a 6x12mm outer bearing & 6x18mm inner carrier bearing.

4910 stub axle
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDDS9&P=7
MIP CVD for 4910 note the difference in the stub axle
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDXN7&P=7


4909/08/07 yoke, stub axle goes into it
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHFY5&P=7
MIP CVD, note the difference in the stub axle
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNTT8&P=7

 

[Bkyd Basher]

i will get a pic of what i got tomorrow so you can check it out