• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

merv lipos

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

revoracer322

RCTalk Qualifier
Messages
173
Reaction score
0
Points
0
Location
my house. lol
RC Driving Style
  1. Bashing
  2. Racing
hey guys kinda a newbie at the hole lipo scene as was wondering if anyone orderd any lipos from hobbyking for there mervs an which ones? Thanks

Or which ones would work. Thanks in advance
 
I ran these packs on mine wich are a VERY tight squeeze but they do fit.


I see their out of stock though, sorry.
 
i have the 2s zippy flightmax's 2200 Mah from hobby king and i have the venom 2s 2000 Mah (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXXMP0&P=0) and i can't really tell a difference. both are great. shipping just takes a while from hong kong unless you wanna pay and extra 25 bucks for express, but it still takes about a week...in the end you could have another lipo for the cost of shipping... i wish someone would sell the zippy's in the states!!!
 
here check this link out
https://www.rcnitrotalk.com/forum/showthread.php?t=74978
it's got a lot of useful information about the MERV. i know the zippy flightmaxx 2200 lipos will fit, but you have to dremel a bit off the battery tray to get them to fit...plus u'll have to solder a traxxas connector on the battery when u get it. if u go that route, just make sure you DON'T cut both wires at the same time when u cut off the connector that came on them. i did that and ruined the battery...lol lessons learned...good luck and keeps us posted which route you take...o and here's the link to the zippy's. they are currently out of stock though...
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6540
 
Thanks for all the info. just curious but how did cutting the wires at the same time ruin the battery? Thanks!
 
O I see. A friend of mine said that if you spend to long trying to solder them you can ruin them is that true? Thanks!
 
Back
Top