Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
tntpoof
Whats Up Doc?
- Messages
- 4,401
- Reaction score
- 2,273
- Location
- Taylor Michigan
- RC Driving Style
- Bashing
- Racing
- Flying
- Boating
doesn't Xray recommend a servo in the assembly manual
blindfaith429
RCTalk Rookie
- Messages
- 15
- Reaction score
- 1
- Thread starter
- #3
Yes, they recommend their own XMS02MG metal gear servo, part number 389171. However, this servo has been discontinued and I cannot find one in stock.
Xray XMS02MG Servo Link
tntpoof
Whats Up Doc?
- Messages
- 4,401
- Reaction score
- 2,273
- Location
- Taylor Michigan
- RC Driving Style
- Bashing
- Racing
- Flying
- Boating
id lookup the specs and get one a tad better in mg or kg and speed .keep the same swing amount unless your radio has endpoint adjustments.. amazon has a few
blindfaith429
RCTalk Rookie
- Messages
- 15
- Reaction score
- 1
- Thread starter
- #5
Went with a Blue Bird servo.
The stock servo mounts require a 2-screw mount (one per side), so it kinda limited my search.
I did find the stock servo specs, and the Blue Bird beat it by a lot, and was only $30. Less than half the cost of the Reefs servo I was originally looking at.
The stock servo mounts require a 2-screw mount (one per side), so it kinda limited my search.
I did find the stock servo specs, and the Blue Bird beat it by a lot, and was only $30. Less than half the cost of the Reefs servo I was originally looking at.
