neobart
Hardcore RCTalk User
Sadly I hardly touch this thing anymore, and it's time it got a new home. 
This is my Race ready LST2 with CF chassis plates and Losi HP front and rear skids. FOC tranny with swapped gears. Mach 427 engine with good compression. Has run 4-5 liters. Lunsford turnbuckles, Outerwears shock boots and BAC Ackerman steering link. Diffs has just been rebuilt with 10K front and 3K rear. One extra set of diffs as well. Two spare LST headers, one 1400, one 1200 and one 600mAh flat packs. One 4000mAh stick for the rotostarter.
One extra input shaft for the tranny and three output shafts. TiNi spurs. Four shock shafts, Three center CVD's and two wheel axles. One LST2 bell(sleeved) and one LST bell (sleeved). 8man +2 and std. pinions. Dynamite MaxLife clutch shoes.
Two LST racer bodies, one beater and one in good condition.
17mm hubs and one set of Proline badlands on 17mm Velocity wheels.
15 degree caster blocks and stock 10 degree blocks. ST racing hingepins(eliminating e-clips).
Two JR z650m for steering and a Futaba s3305 for throttle. All you need is a Receiver.
And some other stuff that you can see in the pics.
Price is 400€ shipped anywhere in the world. Paypal prefered.
Or 440€ with a Nomadio Transciever with all sensors.
Or make me a reasonable offer.
This is my Race ready LST2 with CF chassis plates and Losi HP front and rear skids. FOC tranny with swapped gears. Mach 427 engine with good compression. Has run 4-5 liters. Lunsford turnbuckles, Outerwears shock boots and BAC Ackerman steering link. Diffs has just been rebuilt with 10K front and 3K rear. One extra set of diffs as well. Two spare LST headers, one 1400, one 1200 and one 600mAh flat packs. One 4000mAh stick for the rotostarter.
One extra input shaft for the tranny and three output shafts. TiNi spurs. Four shock shafts, Three center CVD's and two wheel axles. One LST2 bell(sleeved) and one LST bell (sleeved). 8man +2 and std. pinions. Dynamite MaxLife clutch shoes.
Two LST racer bodies, one beater and one in good condition.
17mm hubs and one set of Proline badlands on 17mm Velocity wheels.
15 degree caster blocks and stock 10 degree blocks. ST racing hingepins(eliminating e-clips).
Two JR z650m for steering and a Futaba s3305 for throttle. All you need is a Receiver.
And some other stuff that you can see in the pics.
Price is 400€ shipped anywhere in the world. Paypal prefered.
Or 440€ with a Nomadio Transciever with all sensors.
Or make me a reasonable offer.
Last edited: