lst Steering

[plucker]

Hi guys,
my lst2 has got the original steering servos in it. It now only turns left properly and barely turns right. Will i need to replace the servos or do i do some re adjustments? it seem fine if i lift it off the ground, but when it is stationary or driven it wont turn right well. Any ideas?:surrender

 

[Cupooterluvr]

I'd check the servo saver first. It may have weakened over time.

 

[Scrogg]

Probably one of the servos died. The JR590 servos they install have a short life span.
If it is not a servo, then something in the linkage set-up may have slipped or the servo horn stripped. I don't envy you, the steering linkages are a pain to set right until you get familiar with them.