• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

LRP engine in tmaxx 3.3

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Need some helpful my rear left drive shift keeps popping out of the drive cup on the differential when I give the throttle
 
Are you using tru track? If so you have to wind the pillow balls in more into the a arm .
Also a good idea to get the traxxas extended cups if you haven't already
 
Ahhhhhhhhhhh never thought of that the one that keeps coming out the pillow ball is to far out tilting the tire out a lot makes sense thank you
 
Dude get yourself a camber gauge.....

Don't spray break cleaner on it either, it's too strong on the plastic parts, compressed air will go a long way if available
 
Camber gauge got it will get one tomorrow and I figured and I did use compressed air was reading online to use that

---------- Post added at 11:09 PM ---------- Previous post was at 11:06 PM ----------

@hulkmaxx how was the fitment for the rc solution rollcage on the extended chassis did it involve lot of custom to get it to work
 
I thought I mentioned this in the last post, lol...but get some denatured alcohol and a spray bottle, delute the alcohol and use that as your solvent
 
Ahhhh u probably did lol I apologize don't mean to be a pain in the butt OK will do that lol last time I speak of this issue
 
7a6uru8y.webp


---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------

I'm just using this pic I got off net but my cousin gave me the exact same shocks which I installed but there used kind of beat up still work good tho just wanted to know if there was a rebuild kit. I can get for them
 
Looks like the project came together nicely. And those Proline powerstrokes are great shocks man. I think the rebuild kits are discontinued. I know the shock kit even used sell for way to high on ebay.

---------- Post added at 9:18 PM ---------- Previous post was at 9:16 PM ----------

Camber gauge got it will get one tomorrow and I figured and I did use compressed air was reading online to use that

---------- Post added at 11:09 PM ---------- Previous post was at 11:06 PM ----------

@hulkmaxx how was the fitment for the rc solution rollcage on the extended chassis did it involve lot of custom to get it to work

The RD Logics chassis is the exact same length as the stock #4907 maxx truck, so the cage I would think should fit without to much modification.
 
Your gonna have to take one of each shock apart and measure the Pistons and o rings with a set of calipers, cross reference the numbers with the newer proline shocks that are out,..you might just get lucky I hope bud
 
OK Thanks will do that

---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------

Thanks hulkmaxx I ended up ordering that rollcage I'll find a way to make it fit lol really like it I'm sure some mods gonna have to be done to it you get any time with your RC lately
 
OK Thanks will do that

---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------

Thanks hulkmaxx I ended up ordering that rollcage I'll find a way to make it fit lol really like it I'm sure some mods gonna have to be done to it you get any time with your RC lately

Yah I have been putting a beating down on my MGT a lot lately. Waiting for nephew to get home from the hospital to run his BB revo against my BB LRP maxx.
 
Lol sweet enjoy brother and hope everything is OK with your nephew... I absolutely love the lrp motor damn thing is a rocket
 
Post up the results from measuring it, seals, shaft diameter, ect. & we'll do our best best to tell what parts will fit.
 
quqaresu.webp


---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------

I installed them fit pretty good just gotta play around with the adjustment now
 
Lol sweet enjoy brother and hope everything is OK with your nephew... I absolutely love the lrp motor damn thing is a rocket

No prob man. Yah those LRP's really are great engines. Both of mine have been very durable so far, prob got 2 gallons run through my .32 LRP and it seems to be getting stronger all the time. As for my nephew he has been in the CCU for about a week didn't think he was going to make it for awhile may have rocky mountain tick fever got it where he was working. He had just completely finished up his BB Revo last month I helped him do the break in on it then he got gravely ill. Hoping he gets better soon. Maybe I can get a vid up when we run them. He is running the .28 Big red engine thing is rocket.
 
Back
Top