• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

LRP engine in tmaxx 3.3

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Pretty sure all the ring gears are interchangeable between the maxx rigs. There is a difference in the length of the pinion gears between them. Also the Emaxx diffs have the internal bracing and the x ring seal inside.
 
Ahhhh OK I understand one of my friend told me because I have a handheld temperature gauge there's a digital one small one that mounts on your RC then has a wire that is specialty glued to your engine for exact temp reading but I can't find it online do you have any idea?
 
Ochana25 said:
Ahhhh OK I understand one of my friend told me because I have a handheld temperature gauge there's a digital one small one that mounts on your RC then has a wire that is specialty glued to your engine for exact temp reading but I can't find it online do you have any idea?
Click to expand...

They make these an on board temp gauge, I would rather use a regular gauge though. Here's a link to one on ebay

http://thumbs1.ebaystatic.com/d/l225/m/mSxjqH0pe3nSNwWVd56sfAw.jpg
 
Ochana25 said:
Ahhhh sweet how come wouldn't that one be easier
Click to expand...

Well I would think that with the body shell on it would pretty hard to see the on board temp but it's all preference though. I have one of those on boards somewhere I tried but I just really never cared for it. I had a venom brand that had a built in temp cut off that was programmable.
 
I believe I saw that one on eBay actually one more question what is the max temp lrp not to exceed
 
Ochana25 said:
I believe I saw that one on eBay actually one more question what is the max temp lrp not to exceed
Click to expand...

Well I try not to exceed 260-270 on all of my big block rigs. Both my LRP.30 and my LRP.32 have never gotten about 270. But I am no master tuner by no means either. If my rigs are performing to my expectations then that's good enough for me. You can't always tune by temp any how you have to watch your glow plug the sound of the engine will tell you a lot also.
 
What's the best way for me to learn I have yet to start it up which I will be doing tomorrow I know I have to do break in lol
 
She's ready to go will post video soon

---------- Post added at 3:10 PM ---------- Previous post was at 3:10 PM ----------
aqepede6.jpg
 
9u4y6e8u.jpg


---------- Post added at 4:23 PM ---------- Previous post was at 4:23 PM ----------

As you can see the middle skid plate is off by a lot any idea for this correction guys
 
Got it fixed found a 3 piece by rpm which fit perfect

---------- Post added at 6:49 PM ---------- Previous post was at 6:48 PM ----------

How do you guys post your videos I would like to post one couldn't of done this without all you guys on here thanks
 
Ochana25 said:
Got it fixed found a 3 piece by rpm which fit perfect

---------- Post added at 6:49 PM ---------- Previous post was at 6:48 PM ----------

How do you guys post your videos I would like to post one couldn't of done this without all you guys on here thanks
Click to expand...

The reason that other skid didn't fit is because that is an extended BB chassis you are using. I download vids to my youtube account then copy and paste on here.
 
Need your help hulkmaxx lol the front tires are spinning forward and the rear tires are spinning the wrong way
 
Funny, thanx for the laugh!....

I also am guilty of this, though I had them both backward
 

Similar threads

C
Tmaxx web site
Replies
2
Views
291
CronesRacing
C

RC Builds

Back
Top