Butter Is Da Man
RCTalk Qualifier
I'm selling all my RC stuff because I bought a 400ex, and now I got to repay the money borrowed. So here is the 1st 2 trucks up for sale.
Losi XXXNT
Has a ton of stuff. It was my dad's truck, until recently. I haven't done anything with it since it was given. Here's a list of what it has.
-Trinity Finned Heat Sink Engine Mounts
-Trinity Aluminum Rear Pivot Block
-Trinity Heat Treated Vented Slipper Clutch Disks
-Trinity Threaded Body Teflon Shocks
-Trinity Blue Annodized Chassis Brace
-Trinity Aluminum Front Body Mounts
-Hardened Gold Shock Shafts
-Airtronics 94157 Steering Servo
-Hi-Speed Throttle Servo
-Kevlar Spur Gear (Stock Gearing)
-Graphite Upper Deck, A-Arms, and Shock Towers
-Picco Exhaust Pipe
-Associated Side Exhaust Header
Comes with both Peak Racing Diablo .12 engine, and a Fantom FR .12 engine, both side exhaust, and can come with or without a Futaba radio.
This truck is basically an AD1 except for the chassis, which is the original XXXNT chassis. Comes with a ton of extra parts for whatever you may break, your choice of any kind of racing tire, and comes with a painted Losi body, with no time on it, because my dad didn't race, and I always run my GT.
Next is a Associated MGT.
This was my practice truck. I traded for it not long ago, and don't have a ton of time on this one either since I got it. Comes with a ton of hop ups. Here's a list.
-Associated Factory Team Steering Assembly
-FOC in Tranny
-RPM A-Arms all the way around
-Lunsford Titanium Turnbuckles
-Associated Aluminum Diff Housings
-ProLine PowerStroke Shocks, with every spring made for them
-ProLine 23mm Hub Adapters
-ProLine 40 Series BowTies put on 23mm 40 Series Velocity wheels
-Envy Racing Bi-directional Slider Clutch (never worry about broken clutch springs ever again)
-Hitec 645 Steering servo
-Futaba 9304 Throttle servo
-Venom 1100 rechargable receiver pack
-Mach 26 engine
-Associated Factory Team Header (pipe runs along chassis instead of wrapped around the back)
-XTM High Torque Exhaust Pipe
Comes with a painted ProLine F-150 body, and all the stock parts, along with a ton of spares. Can come with or without a Futaba radio.
I would really like to get $350 for each, but beings I'm getting out of the sport, any reasonable offer will be taken. Both trucks were well taken care of, and would be a great attribute to anyone's fleet of trucks. If there's any questions, please feel free to either drop me a PM, or give me a call at ##########If there's interest, I will have pictures up A.S.A.P. Thanks.
Losi XXXNT
Has a ton of stuff. It was my dad's truck, until recently. I haven't done anything with it since it was given. Here's a list of what it has.
-Trinity Finned Heat Sink Engine Mounts
-Trinity Aluminum Rear Pivot Block
-Trinity Heat Treated Vented Slipper Clutch Disks
-Trinity Threaded Body Teflon Shocks
-Trinity Blue Annodized Chassis Brace
-Trinity Aluminum Front Body Mounts
-Hardened Gold Shock Shafts
-Airtronics 94157 Steering Servo
-Hi-Speed Throttle Servo
-Kevlar Spur Gear (Stock Gearing)
-Graphite Upper Deck, A-Arms, and Shock Towers
-Picco Exhaust Pipe
-Associated Side Exhaust Header
Comes with both Peak Racing Diablo .12 engine, and a Fantom FR .12 engine, both side exhaust, and can come with or without a Futaba radio.
This truck is basically an AD1 except for the chassis, which is the original XXXNT chassis. Comes with a ton of extra parts for whatever you may break, your choice of any kind of racing tire, and comes with a painted Losi body, with no time on it, because my dad didn't race, and I always run my GT.
Next is a Associated MGT.
This was my practice truck. I traded for it not long ago, and don't have a ton of time on this one either since I got it. Comes with a ton of hop ups. Here's a list.
-Associated Factory Team Steering Assembly
-FOC in Tranny
-RPM A-Arms all the way around
-Lunsford Titanium Turnbuckles
-Associated Aluminum Diff Housings
-ProLine PowerStroke Shocks, with every spring made for them
-ProLine 23mm Hub Adapters
-ProLine 40 Series BowTies put on 23mm 40 Series Velocity wheels
-Envy Racing Bi-directional Slider Clutch (never worry about broken clutch springs ever again)
-Hitec 645 Steering servo
-Futaba 9304 Throttle servo
-Venom 1100 rechargable receiver pack
-Mach 26 engine
-Associated Factory Team Header (pipe runs along chassis instead of wrapped around the back)
-XTM High Torque Exhaust Pipe
Comes with a painted ProLine F-150 body, and all the stock parts, along with a ton of spares. Can come with or without a Futaba radio.
I would really like to get $350 for each, but beings I'm getting out of the sport, any reasonable offer will be taken. Both trucks were well taken care of, and would be a great attribute to anyone's fleet of trucks. If there's any questions, please feel free to either drop me a PM, or give me a call at ##########If there's interest, I will have pictures up A.S.A.P. Thanks.
Last edited by a moderator:
