NitroJohnnyD
RCTalk Member
- Messages
- 27
- Reaction score
- 0
- Points
- 0
- RC Driving Style
I have a few Nitro Items that I'd like to sell outright or trade for 1/10 Electric Touring car stuff.
I need 12 -18 NEW, unbuilt 3000 or 3300 batt cells, a couple sets of tires (racing slicks, not the street pattern stuff), a good high end ESC, comm lathe and anything Electric Touring Car related. Contact me at [email protected]
I have the following for sale or trade:
NOVAROSSI CX-12
Side Exhaust, Slide Carb, SG Crank
3 port, Non-Turbo ROAR Legal.
1- USED NOVAROSSI CX-12, Runs Very good!
1 - NOVA-MEGA Side exhaust header
1 - Barely Used NOVA-MEGA .12/C1 pipe
1 - NEW RB CONCEPTS X-12 pipe
1 - ABUSED NOVAROSSI pipe!
4 - Flywheels, 2 - 2 shoe, 2 - 3 shoe
3 - TRINITY REFLEX clutch bells
5 - NEW Hard Coated Pinions
1 - USED Pinion
1 - RD LOGICS Foam Air Filter
$125.00 or trade
Complete TRINITY REFLEX
CENTAX Clutch Assembly
This clutch is barely used. I have several spares Centax Clutches so I am selling this one and one other Centax Clutch to get some items for my
New Losi XXX-S Graphite Plus!
1- Crank Collet
1 - Hard Coated Flywheel
1 - SG Clutch Nut
3 - Centax Flyweight Shoes
1 - NEW retaining spring
1 - Centax center shoe shim
1 - Center Centax shoe
1 - Adjustment Spring
1 - Spring adjusting nut
1 - Inner Sealed Bearing
1 - Clutch Bell
1 - 16tooth Hard Coated Pinion Gear
1 - 19 tooth Hard Coated Pinion Gear
1 - Outer Sealed Bearing
1 - Complete Thrust bearing assembly
1- Retainer Bolt
$50.00 or trade
Complete
CENTAX Clutch Assembly
This clutch is used. I have several spares Centax Clutches so I am selling this one and one other Centax Clutch to get some items for my
New Losi XXX-S Graphite Plus!
1- Crank Collet
1 - Flywheel
1 - SG Clutch Nut
3 - Centax Flyweight Shoes
1 - NEW retaining spring
1 - Centax center shoe shim
1 - Center Centax shoe
1 - Adjustment Spring
1 - Spring adjusting nut
1 - Inner Sealed Bearing
1 - Clutch Bell
1 - 18 tooth Hard Coated Pinion Gear
1 - 22 tooth Hard Coated Pinion Gear
1 - Outer Sealed Bearing
1 - Complete Thrust bearing assembly
1- Retainer Bolt
$40.00 or trade
AIRTRONICS MX-3
COMPUTER, FM, TRANSMITTER ONLY
This is a BRAND NEW AIRTRONICS MX-3, 3 channel FM Transmitter ONLY!
This radio has yet to even have batteries put in it! If you need an extra transmitter or need to replace a broken one, this is the cheapest way out!
This auction is for the TRANSMITTER ONLY, no crystals.
1- BRAND NEW AIRTRONICS MX-3 Transmitter
1 - Original Box & Manuals
$40.00 or trade
H.A.R.D. ULTRA LOW CG
CYLINDER HEAD
This is an almost NEW H.A.R.D. VIPER Head that fits most .12,
rear exhaust engines. This head was used one time on a G4,
then the engine was replaced and I never put the VIPER head back on.
There is NOT a single scratch on it.
H2001 12 Class Viper Cooling Head For Nova Rossi New 12 class engines, including RB, Top, Rex, Mega, Mugen, JP, ect.
1- Almost NEW H.A.R.D. Viper .12 Head
$50.00 or trade
I need 12 -18 NEW, unbuilt 3000 or 3300 batt cells, a couple sets of tires (racing slicks, not the street pattern stuff), a good high end ESC, comm lathe and anything Electric Touring Car related. Contact me at [email protected]
I have the following for sale or trade:
NOVAROSSI CX-12
Side Exhaust, Slide Carb, SG Crank
3 port, Non-Turbo ROAR Legal.
1- USED NOVAROSSI CX-12, Runs Very good!
1 - NOVA-MEGA Side exhaust header
1 - Barely Used NOVA-MEGA .12/C1 pipe
1 - NEW RB CONCEPTS X-12 pipe
1 - ABUSED NOVAROSSI pipe!
4 - Flywheels, 2 - 2 shoe, 2 - 3 shoe
3 - TRINITY REFLEX clutch bells
5 - NEW Hard Coated Pinions
1 - USED Pinion
1 - RD LOGICS Foam Air Filter
$125.00 or trade
Complete TRINITY REFLEX
CENTAX Clutch Assembly
This clutch is barely used. I have several spares Centax Clutches so I am selling this one and one other Centax Clutch to get some items for my
New Losi XXX-S Graphite Plus!
1- Crank Collet
1 - Hard Coated Flywheel
1 - SG Clutch Nut
3 - Centax Flyweight Shoes
1 - NEW retaining spring
1 - Centax center shoe shim
1 - Center Centax shoe
1 - Adjustment Spring
1 - Spring adjusting nut
1 - Inner Sealed Bearing
1 - Clutch Bell
1 - 16tooth Hard Coated Pinion Gear
1 - 19 tooth Hard Coated Pinion Gear
1 - Outer Sealed Bearing
1 - Complete Thrust bearing assembly
1- Retainer Bolt
$50.00 or trade
Complete
CENTAX Clutch Assembly
This clutch is used. I have several spares Centax Clutches so I am selling this one and one other Centax Clutch to get some items for my
New Losi XXX-S Graphite Plus!
1- Crank Collet
1 - Flywheel
1 - SG Clutch Nut
3 - Centax Flyweight Shoes
1 - NEW retaining spring
1 - Centax center shoe shim
1 - Center Centax shoe
1 - Adjustment Spring
1 - Spring adjusting nut
1 - Inner Sealed Bearing
1 - Clutch Bell
1 - 18 tooth Hard Coated Pinion Gear
1 - 22 tooth Hard Coated Pinion Gear
1 - Outer Sealed Bearing
1 - Complete Thrust bearing assembly
1- Retainer Bolt
$40.00 or trade
AIRTRONICS MX-3
COMPUTER, FM, TRANSMITTER ONLY
This is a BRAND NEW AIRTRONICS MX-3, 3 channel FM Transmitter ONLY!
This radio has yet to even have batteries put in it! If you need an extra transmitter or need to replace a broken one, this is the cheapest way out!
This auction is for the TRANSMITTER ONLY, no crystals.
1- BRAND NEW AIRTRONICS MX-3 Transmitter
1 - Original Box & Manuals
$40.00 or trade
H.A.R.D. ULTRA LOW CG
CYLINDER HEAD
This is an almost NEW H.A.R.D. VIPER Head that fits most .12,
rear exhaust engines. This head was used one time on a G4,
then the engine was replaced and I never put the VIPER head back on.
There is NOT a single scratch on it.
H2001 12 Class Viper Cooling Head For Nova Rossi New 12 class engines, including RB, Top, Rex, Mega, Mugen, JP, ect.
1- Almost NEW H.A.R.D. Viper .12 Head
$50.00 or trade
