Leave your Comments

[Skyline Racer]

Hey guys whatup,

As you know, These high performance nitro motors are very expensive, when you get that cash, you have to make sure you make the right choice right?
Well I'm not the best of drivers but i will improve lol. Here are my final choices , i have 300.00 For the best engine possible. Reliable, Fast " bottom , mid, and top ends" Easy to tune, and Great quality. Here are my choices, Please leave any other good race engines i might have left out.

1. O.S VZB
2. RB WS7 2
3. REX P5
4. RB S7 2
5. RB C5

 

[HumboldtBlazer]

Sirio Kani .21 is my vote.
C-5 or S7 II would be my other choices.

 

[Skyline Racer]

Sirio Kanai isnt a bad choice, but it only has 2.1 hp.

By the way, this engine is going into a Mugen Seiki MBX4 XR works edition buggy with a Dynamite Inline pipe.

 

[Error401]

Originally posted by HumboldtBlazer
Sirio Kani .21 is my vote.

I second that in a big way.

Originally posted by SkYLiNe RaCeR
Sirio Kanai isnt a bad choice, but it only has 2.1 hp.

By the way, this engine is going into a Mugen Seiki MBX4 XR works edition buggy with a Dynamite Inline pipe.

Trust me on this SR, the K mill is badass. Don't always believe the numbers. 2.1 rated sounds like a dog, but my K mill scares me. And if it's going in a buggy, then it'll be right. It's a high rpm mill. I'll try to get some video of mine this weekend so you can see.

I'm sure the other mills HB said are badass too. As for the pipe, uh, dynamite? Never seen one on a buggy here, I'd go with a THS.

 

[FlyinRazorback]

The S7II is the least expensive out of the bunch, so get it, and ditch the Dynamite pipe. Look around and get a Novarossi or RB 86 pipe. That should put you around the $300 mark.

 

[Error401]

FRB, what would changing from a THS to the RB 86 do on the Sirio K Mill. I'm running a THS now that has a bit of tip damage, but it till screams. And increase in power of RPM?