i had just bought a jato yesterday, went somewhat fine for the break in process, now, I'm trying to enjoy it and it does nothing but stall out and I've done many carb adjustments, then went back to factory settings, any ideas on why I'm stalling out now and i didnt during my breakin period.
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
jato 3.3 stalls out to much
- Thread starter tuner14e
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Metalhead Matt
RCTalk VIP
Change the glow plug and tune it for performance. Get your temps around 260 and keep them close to that.
Scrogg
Hardcore RCTalk User
Clutch, order a Dynamite Maxlife for the Traxxas flywheel. It will give you a broader idle setting and last much longer than stock. You may have broken the clutch spring. Traxxas clutches are garbage. They engage way too early.
Other thing could be inproper linkage adjustment. Do not use the throttle trim for idle speed. This is referred to a false idle. Use the idle adjustment screw.
Other thing could be inproper linkage adjustment. Do not use the throttle trim for idle speed. This is referred to a false idle. Use the idle adjustment screw.
