Integy Alloy bellcrank kit

[hndaman1]

I ordered up the Integy alloy bellcrank kit for my slash and wow it it a nice kit, comes with bearings etc, and is a machined pc..I will post pics in a bit..

 

[Boogie]

Let us know how it goes. I've heard it reduces slop in the steering a bit, although I haven't really noticed any excessive slop in my steering to begin with, but oh well.

 

[hndaman1]

pics on the way..:thumbup1: it is a perfect fit,has a cf cross bar and everything..

 

[bigdaddee]

niiiiiiiiiiiiiiiice. I want one to

 

[hndaman1]

here is the pics.. this is 6061 allot and has a CF center brace and comes with 4 bearings also..you still use the 3 orignal screws that hold the tie rods/arm from the servo..

 

[TAC]

With that side by side picture comparison it really makes the stocker look puny lol.

 

[hndaman1]

With that side by side picture comparison it really makes the stocker look puny lol.

it sure does and the best part is, there is no slop unlike the stocker had:thumbup1:

 

[WoodiE]

What slop? I can't say I ever realized any slop in my Slash. What was the cost of the bellcrank kit anyways?

 

[sersly]

Hnda, looking forward to how they hold up. The stock cranks on both of mine are pretty loose. I have looked at the TRX ones but I have not killed any parts yet ... knock on wood

Let us know how they do long term

 

[hndaman1]

What slop? I can't say I ever realized any slop in my Slash. What was the cost of the bellcrank kit anyways?

the cost is 28.99 for the type #2

http://www.integy.com/st_prod.html?p_prodid=6436&p_catid=109

and for this one which says type #2 also?24.99


http://www.integy.com/st_prod.html?p_prodid=5334&p_catid=109


but if you become an Integy team member(which is FREE) you get a discount so it less I actually only paid 13.91 and the slop I had in mine was from up and down movements in the centers posts section, and the center section seemed sloppy to me also..there was too much play in the plastic setup in my rig..