• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Help!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

ma2639020

RC Newbie
Messages
3
Reaction score
0
Points
0
Location
Gulfport,MS
RC Driving Style
  1. Racing
My 3.3 will start fine but when it starts its at full throttle and i have no control of it can anyone help with this I'm new to this and have no clue what to do about this issue
 
...or your batteries are shot.
NEVER start a nitro car till you know everything is working. NEVER.
For future reference, read the rules and title your threads accordingly, otherwise every thread on this entire forum will be titled "Help".
 
Or set in o. Some stacked wood so if it takes off you can just cover the end of you pipe to cut it off
 
tmaxxman58 said:
Or set in o. Some stacked wood
Click to expand...

I don't have a clue what that means. The period means the end of the sentence and the capitol S indicates the beginning of the next.

so if it takes off you can just cover the end of you pipe to cut it off
Click to expand...
That part I understand, but again, NEVER start a nitro car till you've checked out the electronics and the mechanics. NEVER.
You can get some really nasty tire burns on your arms or you can throw the rod.
 
Last edited:
check your radio gear to see if the settings are neutral or reversed? could be as simple as that. happend to me. thought it was the bloody car that was at fault.
 
Sorry my iPad is using the auto spell. I meant to say was. You can stack some wood under the rig and start it. If it loses control you cover the end of the pipe for a fast shut down.
 
Damn auto spell keeps getting me too! I have to double check everything typed before I send it or you can't understand anything I say.
 
With the truck not running. Turn on the truck and your radio. Pull the throttle. You should see the throttle servo moving. And a rod connected to the carb. Is that all working properly? The slide on the carb (thing with blue boot on it) should be alll the way in with no throttle. All the way out with full throttle aplied.

If nothing happens check batteries ect. If its backwards swich the channel on the radio.
 

RC Builds

Back
Top