Help???

[CJS]

When I replaced my glow plug in my Savage 25 I noticed that it was dumping fuel into the the head. After taking the head loose I noticed the glow plug was crooked in the plate below the head. Any advise on where I can get a new plate that goes below the head. Thanks in advance. :bow:

 

[HeartBreak]

If it's the stock S25, you can easily get ahold of the glow-button.

Here is the link to the one at Tower:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXFRD9&P=Z

 

[Rolex]

Try your LHS first. Then you don't have to pay shipping. If they can't get it go to the HPI site, Tower Hobbies or A Main hobbies. I think your looking for the 'underhead', part #1447. (Double check with your manual. I just realized that one is for the 4.6) If you don't have the manual, you can probably find it on the Team FastEddy site. There are links to it on the main forum page.
You have obviously cross threaded it. Try removing it and re-installing it carefully. If you didn't jam it in too far the last time, it's possible to get it threaded in correctly.

You're FAST, HeartBreak............:jet:

 

[bnrpat09]

you will almost always surely be able to get anything for the truck you bought from the hobby shop you bought it from, AKA your LHS (local hobby shop)
but incase they dont here are a few good sites for parts

www.towerhobbies.com
www.liquidrc.com
www.hobbypeople.net
www.discounthobbywarehouse.com

and surely there are others out there these are just a few of the ones where you will be able to get oem parts, or you can always go to your manufacturer's website

 

[CJS]

Found it thanks everyone.:bow: