Help Reverse Mod

[screaminsavage]

I just dropped in rev last night and I'm trying to set the arm on my servo . Please tell me does that flat pin that sticks out of the mod that I put in the tranny go all the way in for reverse and all the way out for forward (middle neutral). The pin I'm reffering to is the one you put that bar around that hooks to the servo . :beer:

 

[SavageRockS]

I believe if it's in all the way, it should go forward, out for reverse, there should not be anything in between. I know what you mean, but there should not be a 'neutral' position, otherwise your tranny will keep spinning and you could burn your clutches..

:mex:

 

[shorty]

he is right
/\
|
|:thumbup:

 

[screaminsavage]

Yep he was right I have it backwards but I'm not changing it . Whats it going to hurt. I drive the truck and I know if the switch is up at F then its in rev not forward, down on R is forward. Its bass acwards:trashed: By the way if its in the middle its in Neutral and yes it spins like hell but goes nowhere! I fixed that problem by adjusting the servo arm.