Great Tip for Traxxas 3.3!!

[brad55102]

If you have a 3.3 then you know how difficult it is to attach the glow plug wire. Just take some shrink tubing about 2 inches long and reinforce the weak area of the glow plug wire. I doubled up, 2 layers and it is very strong.
I looked on ebay and i noticed that you can buy a special glow plug wire for this very problem, but it's $7, thats a rip off. I fixed mine for .03 cents.
\
Hope this helped someone

 

[stevecz28]

X2 on the doubled up shrink wrap on the glow plug wire..it will also give it extra protection in the case of a roll over. where you might end up sliding and ripping some of the wiring isulation off of it. but helpful tip for some of the newbs around nitro

 

[Sparky005]

Can you get a picture up?

I just replace my glow plug wire....