• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

getting some stuff.....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
S

SaVaGeR21

RCTalk Addict
Messages
673
Reaction score
0
Points
0
RC Driving Style
hpi dual disk brake set:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFYL2&P=7

hpi 18t clutch bell
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFKM8&P=7

hpi flywheel 3 pin
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFXU6&P=7

hpi teflon clutch shoe/spring set
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFXU7&P=7

thats all i need i think for right now, do you guys think anything else?? i also have a few questions. do i need any other parts for the brake set? on the bottom two items i listed, is that all i need for the 3 shoe clutch? and will the 18t clutch bell fit the stock savage 21 52t spur gear? whats the next clutch bell down that will fit the 52t spur? thanks in advance for the answers.
savager
 
Probably just need to adjust brakes thats all I did and wow they work great. Just ad a little more fuel line to the pin .:shy:
 
Ummm I haven't tried anything higher than a 15t Bell with the 52T spur at all. Let us know how you come out on that. You will need nothing further with for the brake conversion. It comes with everything necessary. You are going to be so happy you bought it. If you are getting a new clutch bell you may want to try getting some new bearings for it as it is kind of a pain to switch bearings around all the time for me. Great hop ups. Savager you also may want to take a look at getting the ofna slide carb linkage set. It's like $8.00 and a good time to do it.
 
newnitrofan, does that have anything to do with the throttle? cause i already have the ofna throttle/brake mod.
savager
 
Yup than you are all set. I think the only thing I would add to your list is just one set of bearings. I usually run duratrash bearings they are pretty durable and are cheep. Tower has them for like three dollars for the flywheel.
 
thanks guys, could you supply a link newnitrofan?? and i think instead of the 18t clutch bell, I'm just gonna get a 49t spur gear cause i heard the 18t will only work with the 49t spur and that spur gears are way easier to change then clutch bells. so instead of the clutch bell, I'm getting a 49t spur gear.thanks again
savager
 

RC Builds

Back
Top