Getting a new engine

[savon]

Ok well since I blew my con-rod I've been thinking and i decided I'm going to get a new engine.

What would be a good engine for the MMGT 3.0?

Whats the biggest engine i could put in the MMGT 3.0?

I was looking at the Axial .28 but i didn't know if I could.

Thanks ahead of time

 

[Scrogg]

Put a OS 18 in it.
If you can modify it to take a big block engine, a .21 will be more power than you realize.
To pick a good engine out for you I need to now if your engine is a side or rear exhaust and if it is a threaded or SG style crank.
Browse www.towerhobbies.com and look at all the various engines. You'll see what the difference is in cranks and such.
I am thinking the LRP Z.18 would be a huge boost for you but i do not know what style engine yours is nor can I even find your engine or specs on tower.

 

[Macca Pacca]

.18 engines will give you more than enough power for a truck as big as the 3.0 I've seen a savage with a .18 in it and it halled a$$.

 

[surgemaster1970]

Crankitup has a MGT 3.0 with a Axial .28.Before the .28 he had a .32.The same type .32 I have in my MGT 8.0..He has a vid on his thread.The trucks a little overpowered but handles the powerplant well..

 

[vlad]

the SH .21 is a good way to go