Gear box grease?

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Smiddy

RCTalk Basher
Messages
43
Reaction score
5
Savage 4.6 not shifting into second gear. So I toke apart the gear box, it was covered in grease, is this grease necessary?the pawl was covered in grease and not loose enough to engage second.what’s best to clean and what grease or lub is best.
 

Attachments

  • E9124CDE-0EE7-4C62-9611-7D728F8E10C8.jpeg
    E9124CDE-0EE7-4C62-9611-7D728F8E10C8.jpeg
    334.1 KB · Views: 127
  • 4F52D5CB-ED49-4DBE-BFD2-696F753F5596.jpeg
    4F52D5CB-ED49-4DBE-BFD2-696F753F5596.jpeg
    316.5 KB · Views: 69
  • 6196D2EE-06B6-41D8-8F12-B1F355F4A7B9.jpeg
    6196D2EE-06B6-41D8-8F12-B1F355F4A7B9.jpeg
    155.5 KB · Views: 68
Savage 4.6 not shifting into second gear. So I toke apart the gear box, it was covered in grease, is this grease necessary?the pawl was covered in grease and not loose enough to engage second.what’s best to clean and what grease or lub is best.

I don't have a Savage ,but I run the Mgt's ,tranny's are the same concept , I run a greaseless trans.
because grease will destroy an fry the one way bearing ,if any grease is used it should only be lightly
on the gear an a very sticky grease is used!..👍😎
 
Back
Top