Fun Cool tool tip.

[FastEddy]

I found these little Business Card Magnets at Office Depot.
They make great holders for any small metal parts or tools in the shop or pit.

 

[Buggyracer28]

Say "fun cool tool tip" 5 times fast... hahaha

Nice tip Eddy, that could come in handy.

 

[4u2nv]

your always thinkin man! Good tip!

 

[Monkey Wrench]

You're like...MacGyver!

 

[SMaxxin]

Great tip Eddy....What are you cuttting with all those razor blades???

 

[savagewild]

Another small tip i learned this weekend for making you monster truck sit lower to the ground & its not permanent........dont have to do any mod either........you take a zip-tie and put it through the a-arm near the c-hub and go through the shock tower where it dont interfere with the shocks movement........now you just tighten the zip-tie to get the truck to sit at whatever lower highth you want.........do the same thing to the front & back arms on both sides...........

 

[FastEddy]

I do that for road racing with my MT.
I had to borrow LONG zips from RobMob at the last race.
Need to make sure they are adjusted evenly. Lift the front of the truck off the table slowly till one wheel just comes off then tighten the Zip on the other side till both wheels come off the table at the same time. Do the same for the rear. If you want, you can also do it side to side so all 4 are the same.