squid929
RCTalk Member
I have a thunder tiger ST-1 that I had just run a tank of fuel through, and when I refueled it after a cool down, re primed, it won't idle without the glow starter connected. If I hold the rpm's up a bit it will stay running but then it cuts out if you let it off. Once I got some heat built up and ran it around abit it continued with the idle prob. The first run had the motor temp up to just under 200 Deg F. and it ran fine. Now it seems I can't get full rpm out of it. I get smoke from the pipe, and fuel mist out of it at idle. the motor has had maybe 10 tanks run through it (Morgan 30%/12%) outside temp is around 1 Deg C.
any ideas?
any ideas?