Sold / Found FS: T-Maxx 3.3 - Fully Equipped Aluminum and 50s Chevy Body

[marauder]

$500.00 Shipped - Make offers, may negotiate.
3.3 T-Maxx, runs great and has always had a filter on the fuel line. Lots of upgrades, lots of spare parts, too much to list. I'm sure I will leave something out of this list, but I assure you this truck is well worth the money. I wouldn't be selling if I didn't need a new vehicle asap. Nearly everything pictured is included except the tools, may throw in toolboxes if it makes it easier for me to ship the items.

New Full Set of Black RPM Arms - Not Installed
New Painted Proline 50s Chevy Body - Ran once on truck
Titanium Turnbuckles
Hi Torque steering servo with metal gears - also have the stocker.
Traxxas RX Hump pack and charger

Integy MSR8 HD Shocks (1 needs rebuilt, bent shaft will cost ~$10 to repair),Progressive Springs kit, Battery Box, servo guard, Wheelie Bar, Front Bulkhead,New Rear Integy Bulkhead - Not Installed, Front and rear aluminum bumpers, Sway Bar, Gear Box Collars, chassis braces, front/center/rear skids, rear dual pipe and header, I'm sure I've missed something or other. If you have to know ask, I will let you know.

Proline 40 Series Commando Beadlocks w/Big Joes Tires in very good condition.
Nearly full box of RC Screws stainless hex head screw kit. Only replaced a few screws with this kit so far.

 

[alpinehyperlite]

Nice, How hard is it to tune with the duals?

 

[marauder]

It's not bad, I'm a novice in nitro terms and I've never had a problem. It is difficult at first if you're used to priming by holding your finger over the pipe though because you're plugging two holes that are a lot further apart and they're slash cut downward so its akward on the hands until you figure out what works for you.

In terms of bashing, the wheels make this thing go almost anywhere. 9 times out of 10 it will also land on it's feet. Overall it's a great basher, I just don't have the time for nitros anymore and I need the cash pretty bad.

This one was mostly built by my friend who's been into r/c since I was in elementary school.

 

[mach1basher]

Are you willing to part out the wrenches? I'd love to take those off your hands.

 

[marauder]

I may part out everything. If anyone wants something I have, let me know your offer.

As for the tools, maybe...I'm looking to get more 1/18th scale tools, so make an offer.

 

[mach1basher]

I'll give you cash what are you looking for?

 

[marauder]

I'm not even sure the value man, about the only reason I'd sell them would be to replace them with tools better suited for my 1/18th scales. Make an offer, the worst I can say is no.

 

[mach1basher]

Never mind I had those driver and didn't like them much. I'm more into those pink dynamite ones.

$50 in a money order.

 

[marauder]

$50.00 for which, the 3 pinkish colored dynamite hex drivers? I'm not finding them anywhere online priced anywhere near that high...

 

[mach1basher]

I'm sorry my mistake I had some drivers like those black ones and didn't like them at all but they are differant then yours. Yes $50 for the black ones with the case. Too much?

 

[unccpathfinder]

Slick looking truck and good price...

 

[marauder]

I'm sorry my mistake I had some drivers like those black ones and didn't like them at all but they are differant then yours. Yes $50 for the black ones with the case. Too much?

Ok, let me get you a list of the actual sizes of all the drivers first so you can verify which ones you want.

Slick looking truck and good price...

Interested? I'm very negotiable on the price, my brother has a T-Maxx and was willing to buy any parts I didn't sell so he could put them on his truck.

 

[savon]

what new vehicle are you looking for?

 

[unccpathfinder]

I'd love to say I was interested but I just purchased a truck about a month ago for over $300 and just built an all aluminum chassis for over $400 so if I sale that or if you want to part out specific things on that truck or make some trades thats about all I can do until I build my RC budget back up

 

[marauder]

what new vehicle are you looking for?

Actually bought it last night, 06' Silverado 1500.

Sorry if my replies are delayed, this is a busy weekend for me. King's Royal race in eldora! woohoo!

 

[savon]

hmmm you said ud partout, how much for the 3.3

 

[marauder]

Well, I'd like to keep everything that's on the truck on it, together. As for the spare parts that aren't installed I might work something out, sorry for the confusion. Several locals are interested, so this one may go fast.

 

[CharliesTheMan]

I'll buy those red handled wrenches (dynamite maybe?) if he only buys the black ones. Are the allen wrenches or screwdrivers?

 

[marauder]

I'll buy those red handled wrenches (dynamite maybe?) if he only buys the black ones. Are the allen wrenches or screwdrivers?

They're Hex drivers, 1.5mm, 2.0mm, and 2.5mm I believe. I need to double check to be sure. Please be patient though, this is a busy weekend for me.

 

[marauder]

Final bump to the top, make me an offer I can't refuse.