Traxxas T-maxx 2.5 in good condition,
2 gallons gone through engine,
everything on the truck works fine,
Hop-ups include:
-RPM chrome bumpers front and rear
-Sirio big bore pipe
-Aluminium skid plates front has snapped off at the front due to hitting it against the kerb(not installed)
-Front Aluminium lower A-arms
-Aluminium chassis braces
-FOC kit installed
-Differential spool(not installed)
-18 tooth clutch bell(installed)
Spares:
-Body posts front and rear
-Friction pegs - 3 packs
-Spur gear 72 tooth - 2 packs
-Susspension arms upper - 1 pack
-Shock caps - 1 pack
-EZ start controller - 2 starters
-Chassis braces - 2 of them
-Head protectors - 3 of them
-Engine mount - 1 of
-Susspension arms lower - 3 of them
-Bumper front and rear(slightly scuffed normal wear) 2 of them
-Rear skid plate - 1 of
-Front skid plate(installed) 1 of
-8 shocks(2 shafts bent but rest are fine)everything is included(spacers, pre-loaders,springs etc)
-20 tooth clutch bell
-Pull start - 1 of
-2 EZ start wires(don't use them as i use a glow starter)
-2 stock servo's 2018
-Stock exhaust pipe
-Front right/rear bulkhead
-Reverse module bit's
-Stock stickers only a few used
-Stock body shell
Other things to be purchased:
-Pro-line 40 series spinners (only used once still in mint condition) 2 packs, 2 spinners in each pack - £35
-4 Stock HPI rims(2 have scuff's to the outer edge, all the rest are fine)- £10
-1'st generation EZ starter - £4
-Chevy suburban body shell painted black with Jack daniels symbols painted on - £10
-K&N air filter
You may purchase the truck with all the hop-ups and spares for £330
i'm looking for a quick sale, i would rather if i could deliver it to you or if you may and want to pick it up if it's not too far.
Spinner, bodyshell pic's T-maxx pic's
May px for buggy, another truck,
Thanx everyone for looking
Can only sell to u.k resident's sorry :shrug:
2 gallons gone through engine,
everything on the truck works fine,
Hop-ups include:
-RPM chrome bumpers front and rear
-Sirio big bore pipe
-Aluminium skid plates front has snapped off at the front due to hitting it against the kerb(not installed)
-Front Aluminium lower A-arms
-Aluminium chassis braces
-FOC kit installed
-Differential spool(not installed)
-18 tooth clutch bell(installed)
Spares:
-Body posts front and rear
-Friction pegs - 3 packs
-Spur gear 72 tooth - 2 packs
-Susspension arms upper - 1 pack
-Shock caps - 1 pack
-EZ start controller - 2 starters
-Chassis braces - 2 of them
-Head protectors - 3 of them
-Engine mount - 1 of
-Susspension arms lower - 3 of them
-Bumper front and rear(slightly scuffed normal wear) 2 of them
-Rear skid plate - 1 of
-Front skid plate(installed) 1 of
-8 shocks(2 shafts bent but rest are fine)everything is included(spacers, pre-loaders,springs etc)
-20 tooth clutch bell
-Pull start - 1 of
-2 EZ start wires(don't use them as i use a glow starter)
-2 stock servo's 2018
-Stock exhaust pipe
-Front right/rear bulkhead
-Reverse module bit's
-Stock stickers only a few used
-Stock body shell
Other things to be purchased:
-Pro-line 40 series spinners (only used once still in mint condition) 2 packs, 2 spinners in each pack - £35
-4 Stock HPI rims(2 have scuff's to the outer edge, all the rest are fine)- £10
-1'st generation EZ starter - £4
-Chevy suburban body shell painted black with Jack daniels symbols painted on - £10
-K&N air filter
You may purchase the truck with all the hop-ups and spares for £330
i'm looking for a quick sale, i would rather if i could deliver it to you or if you may and want to pick it up if it's not too far.
Spinner, bodyshell pic's T-maxx pic's
May px for buggy, another truck,
Thanx everyone for looking
Can only sell to u.k resident's sorry :shrug:
