Z400
Gone - bye bye.
Hey guys and gals
heres a handfull of goodies that i will not be needing anymore.
Traxxas Pull Starts-
4 complete pull starts
1 Brand new in the package pull start
3 Used but in great working condition pull starts
1 pullstart case, and 1 pullstart retainer ring part.
$13 shipped for the NIP pullstart
$6 shipped for each used pullstart
$15 shipped for all used pullstarts
$25 shipped for all pullstarts and pullstart parts
Traxxas OWB's-
4 Traxxas One Way Bearings
3 used and 1 brand new
$3 shipped for each used OWB
$6 shipped for the brand new OWB
$8 shipped for all 3 used OWBs
$13 shipped for the OWB lot
Traxxas Revo Fuel tank lid
used, no seal assembly, spring with pin
FREE
Trinity Revo SB header, cut, needs a coupler or tubing to connect the 2, "flex header" doesn't bend or break on impact
used
$4 shipped
4 Flywheels
Revo/Maxx applications
2 traxxas stock used 2 pin flywheels
$2 shipped each
2 used integy 3 pin flywheels
$3 shipped each
$8 shipped for all 4
Clutchbells-
Revo/Maxx applications
3 14t bells
1 traxxas vented, brand new
$6 shipped
1 traxxas 18t bell, Slightly used
$5 shipped
2 racers edge 14t bells-VENTED-
1 used- $4 shipped
1 new- $6 shipped
1 racers edge 19t bell
used
$5 shipped
$15 plus shipping for the lot
14t,18t,19t- $13 shipped
OS .18TM engine
this engine has been worked, i have put it through alot, it survuved 19/36 gearing on 9 gallons, it survived being drowned 2 times in 2 MUD puddles with 9 gallons, its survived MANY high RPM passes with 7+ gallons, Shes got 10 gallons on her at the moment. Starting to lose compression at this time. I'm parting it out for parts. i would not recomend buying the engine whole to run it and expecting it to run for 5 more gallons, so if you do, dont cry to me. This engine has been Beaten! the front bearing is leaking
cooling head is scratched up pretty good on the left side of the top fin, knicks here and there, dirt caked on it. needs a new button as this one is partially stripped, still works but the threads are rough- $3 shipped for the head
clutch assembly is listed above(except the clutch shoes as they are toast)
carb- full 10 gallons through it, never been sealed or rebuilt, theres an area around the part of the carb that sits in the crank case that is chipped off, carb still performs well, could use a new body, no stripped screws or threads, Air filter NOT included $8 shipped
Revo stock engine mount, OK condition, knicks and scratches, no stripped holes $3 shipped
exhaust system-
THS maxx pipe, same as the revo pipe the only differance is the stinger is at an angle instead of being straight. knicks and a few dents. this pipe is awesome, i love this pipe, the stinger is drilled out to 5/16", can polish before i sale it for $3 extra. other wise $17 shipped, $20 shipped with polishing done.
OS .18TM Stock header, no dents that i can see, no scratches, just dirt caked on it, can polish if necessary and clean up. $5 shipped, $7 shipped with polishing.
Crank- well i havent had it out to look at it. but from what i can see through the backplate, and carb area, its in great shape- $2 shipped
Piston and sleeve....yea lets just leave those few parts alone:dancer:
so just let me know if theres something you see and you need.
PM's are welcome and so are e-mails with questions or offers, [email protected]
thanks for looking
Sean
heres a handfull of goodies that i will not be needing anymore.
Traxxas Pull Starts-
4 complete pull starts
1 Brand new in the package pull start
3 Used but in great working condition pull starts
1 pullstart case, and 1 pullstart retainer ring part.
$13 shipped for the NIP pullstart
$6 shipped for each used pullstart
$15 shipped for all used pullstarts
$25 shipped for all pullstarts and pullstart parts
Traxxas OWB's-
4 Traxxas One Way Bearings
3 used and 1 brand new
$3 shipped for each used OWB
$6 shipped for the brand new OWB
$8 shipped for all 3 used OWBs
$13 shipped for the OWB lot
Traxxas Revo Fuel tank lid
used, no seal assembly, spring with pin
FREE
Trinity Revo SB header, cut, needs a coupler or tubing to connect the 2, "flex header" doesn't bend or break on impact
used
$4 shipped
4 Flywheels
Revo/Maxx applications
2 traxxas stock used 2 pin flywheels
$2 shipped each
2 used integy 3 pin flywheels
$3 shipped each
$8 shipped for all 4
Clutchbells-
Revo/Maxx applications
3 14t bells
1 traxxas vented, brand new
$6 shipped
1 traxxas 18t bell, Slightly used
$5 shipped
2 racers edge 14t bells-VENTED-
1 used- $4 shipped
1 new- $6 shipped
1 racers edge 19t bell
used
$5 shipped
$15 plus shipping for the lot
14t,18t,19t- $13 shipped
OS .18TM engine
this engine has been worked, i have put it through alot, it survuved 19/36 gearing on 9 gallons, it survived being drowned 2 times in 2 MUD puddles with 9 gallons, its survived MANY high RPM passes with 7+ gallons, Shes got 10 gallons on her at the moment. Starting to lose compression at this time. I'm parting it out for parts. i would not recomend buying the engine whole to run it and expecting it to run for 5 more gallons, so if you do, dont cry to me. This engine has been Beaten! the front bearing is leaking
cooling head is scratched up pretty good on the left side of the top fin, knicks here and there, dirt caked on it. needs a new button as this one is partially stripped, still works but the threads are rough- $3 shipped for the head
clutch assembly is listed above(except the clutch shoes as they are toast)
carb- full 10 gallons through it, never been sealed or rebuilt, theres an area around the part of the carb that sits in the crank case that is chipped off, carb still performs well, could use a new body, no stripped screws or threads, Air filter NOT included $8 shipped
Revo stock engine mount, OK condition, knicks and scratches, no stripped holes $3 shipped
exhaust system-
THS maxx pipe, same as the revo pipe the only differance is the stinger is at an angle instead of being straight. knicks and a few dents. this pipe is awesome, i love this pipe, the stinger is drilled out to 5/16", can polish before i sale it for $3 extra. other wise $17 shipped, $20 shipped with polishing done.
OS .18TM Stock header, no dents that i can see, no scratches, just dirt caked on it, can polish if necessary and clean up. $5 shipped, $7 shipped with polishing.
Crank- well i havent had it out to look at it. but from what i can see through the backplate, and carb area, its in great shape- $2 shipped
Piston and sleeve....yea lets just leave those few parts alone:dancer:
so just let me know if theres something you see and you need.
PM's are welcome and so are e-mails with questions or offers, [email protected]
thanks for looking
Sean
