Z400
Gone - bye bye.
Hey everyone.
putting an engine up for sale.
it is a Brand new, still in original box, OS .46 VX-M Marine engine.
Engine has never seen fuel, engine has never been mounted in a boat.
I have a few of these, decided to part with this one a week or so ago.
Manual, Original box, and sticker sheet are included.\
Dust caps are not included
engine is ready to go for your boat!!
Specs-
Displacement: 7.45cc (0.455 cu in)
Bore: 22.0mm (.866")
Stroke: 19.6mm (.772")
Power Output: 2.5 BHP at 23,000 RPM
Weight: 445g (15.7oz)
Practical RPM Range: 2,500 - 28,000 RPM
Crankshaft Thread Size: 1/4-28
Length: 106.0mm (4.17") from carb intake to the front of crankshaft
Width: 36mm (1.42") neglecting the engine mounting flanges
45mm (1.77") between the mounting hole centers
Height: 87mm (3.43")
Features-
Water-Cooled Cylinder Head
One-Piece Crankcase
ABC Construction
Ball Bearing-Supported Crankshaft
Rear Exhaust (rear exhaust points toward front of boat)
Schnuerle Porting
Rear Rotor Intake
New Type #40A Carb
i bought it new of course, from Omni Models
http://www3.omnimodels.com/cgi-bin/woi0001p?&I=OSMG1647&P=7
$240 plus some 7somethin % tax charge plus shipping.
i payed some ridiculous Illinois price for it.
not looking to make a profit really.
more looking towards to help a fellow boater out.
$230 shipped Via USPS Priority Mail with Confirmation
if you have any questions regarding this item, you can PM me or E-mail me at [email protected]
I've also got feedback on a number of forums, so if you would like some feedback info, just let me know.
Thanks
-Sean
putting an engine up for sale.
it is a Brand new, still in original box, OS .46 VX-M Marine engine.
Engine has never seen fuel, engine has never been mounted in a boat.
I have a few of these, decided to part with this one a week or so ago.
Manual, Original box, and sticker sheet are included.\
Dust caps are not included
engine is ready to go for your boat!!
Specs-
Displacement: 7.45cc (0.455 cu in)
Bore: 22.0mm (.866")
Stroke: 19.6mm (.772")
Power Output: 2.5 BHP at 23,000 RPM
Weight: 445g (15.7oz)
Practical RPM Range: 2,500 - 28,000 RPM
Crankshaft Thread Size: 1/4-28
Length: 106.0mm (4.17") from carb intake to the front of crankshaft
Width: 36mm (1.42") neglecting the engine mounting flanges
45mm (1.77") between the mounting hole centers
Height: 87mm (3.43")
Features-
Water-Cooled Cylinder Head
One-Piece Crankcase
ABC Construction
Ball Bearing-Supported Crankshaft
Rear Exhaust (rear exhaust points toward front of boat)
Schnuerle Porting
Rear Rotor Intake
New Type #40A Carb
i bought it new of course, from Omni Models
http://www3.omnimodels.com/cgi-bin/woi0001p?&I=OSMG1647&P=7
$240 plus some 7somethin % tax charge plus shipping.
i payed some ridiculous Illinois price for it.
not looking to make a profit really.
more looking towards to help a fellow boater out.
$230 shipped Via USPS Priority Mail with Confirmation
if you have any questions regarding this item, you can PM me or E-mail me at [email protected]
I've also got feedback on a number of forums, so if you would like some feedback info, just let me know.
Thanks
-Sean
