Conversion back up for sale.
New Era dual engine chassis
New Era Front & Rear Skidplates
2 New Era engine mounts (w/proper hardware)
RC Solutions spur gear
Center driveshafts by RC Alloys w/outdrives and brake hex (these are custom made, exxxtra beefy and $80 new)
Throttle post and custom linkage (not pictured)
Proline Escalade EXT entended body w/custom paint job includes decals (Never Used)
When I bought the kit from New Era it came with "standard" linkage for dual engines. What I mean is that the rod was only threaded one direction so you could only tune the engines by 1 entire turn of the ball link at a time. In my opinion this makes it quite difficult to match the engines. I always had the idea of using a small turnbuckle (like from a mini-t) instead of standard threaded rod. That would allow you to make fine adjustments to get the engines matched better. I recently just happend to upgrade my Mini-T from alloy turnbuckles to titanium so what I'll do is throw in a couple turnbuckles (one long, one short.. not sure which one will fit better) so the kit is more complete. The only other thing you would need is a double ended ball link.
you need the white piece. This kit is $1.59 @ Tower Hobbies. you might be able to find it at your local hobby shop as well
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD903&P=7
Take it all for $80 shipped to 48 states
