I am selling my GS Storm Pro. It will include....
- OS .21-RG-X. The engine has seen about 3 gallons. Had to grid chassis slightly to accept a PS engine. Stock GS flywheel and 3 shoe clutch setup. Also OS headder and Dynamnite 1/8th Off Road pipe
- Pro-Line body. Shows signs of wear but still plenty of life.
- Hitec HS-645MG servo for steering and a JR Racing Z270 servo for throttle
- Trinity 1100 mAh 5 cell hump pack with built in charge cord. Will even throw in a wall charger for JR setups.
- Spare set of Pro-Line Crimefighers on dish wheels.
- Two spare wings
- Screw kit from Hex Head screws + other misc screws and nuts.
- A good deal of spare parts.
NO radio or receiver is included. If you need a radio I have a stock Savage Tx and Rx I can throw in to the package. I am currently running a snyth setup and will be transfering it to another RC.
Pictures can be found at http://www.jrmcvicker.com/Storm
The only part that isn't PRO is the hinge pin holders. The hinge pin holders are the black plastic RTR pieces. I managed to tank 3 of the 4 by shearing the screw heads off. At the time of replacement my LHS didn't have the aluminum ones in stock. I decided to stick with the plastic ones because they were cheaper to replace when I did shear a screw head off
PayPal is preferred. Currently 55 - 0 - 0 on eBay and 70 - 0 - 0 on HeatWare. I also have feedback here.
Looking for $300 shipped OR best offer. You can contact me via AIM @ jrmcvi or e-mail @ [email protected]. Remove NOSPAM.
EDIT: Price Change.
- OS .21-RG-X. The engine has seen about 3 gallons. Had to grid chassis slightly to accept a PS engine. Stock GS flywheel and 3 shoe clutch setup. Also OS headder and Dynamnite 1/8th Off Road pipe
- Pro-Line body. Shows signs of wear but still plenty of life.
- Hitec HS-645MG servo for steering and a JR Racing Z270 servo for throttle
- Trinity 1100 mAh 5 cell hump pack with built in charge cord. Will even throw in a wall charger for JR setups.
- Spare set of Pro-Line Crimefighers on dish wheels.
- Two spare wings
- Screw kit from Hex Head screws + other misc screws and nuts.
- A good deal of spare parts.
NO radio or receiver is included. If you need a radio I have a stock Savage Tx and Rx I can throw in to the package. I am currently running a snyth setup and will be transfering it to another RC.
Pictures can be found at http://www.jrmcvicker.com/Storm
The only part that isn't PRO is the hinge pin holders. The hinge pin holders are the black plastic RTR pieces. I managed to tank 3 of the 4 by shearing the screw heads off. At the time of replacement my LHS didn't have the aluminum ones in stock. I decided to stick with the plastic ones because they were cheaper to replace when I did shear a screw head off
PayPal is preferred. Currently 55 - 0 - 0 on eBay and 70 - 0 - 0 on HeatWare. I also have feedback here.
Looking for $300 shipped OR best offer. You can contact me via AIM @ jrmcvi or e-mail @ [email protected]. Remove NOSPAM.
EDIT: Price Change.
Last edited:
