factory carb settings tc3

[00zx9jjb]

I'm resurrecting an abused Tc3 and need to know hen,lsn and idle screw settings.
Thanks

 

[saddlehorse]

http://www.rc10.com/racerhub/techhelp/techntc3.htm

 

[00zx9jjb]

I can't get that link to work on my mac

 

[saddlehorse]

My bad. Old link
I did google search and it popped up.

---------- Post added at 6:05 PM ---------- Previous post was at 5:58 PM ----------

What I found is 3 turns on hsn and flush on the lsn

 

[00zx9jjb]

thanks a lot, i got it to fire but would quit, changed plug and it fired up and revved high. my hsn was at 3 3/4 so i bring it to 3 and adjust the idle.

 

[saddlehorse]

The hsn wont affect your idle. Set idle gap to about 1mm and go from there

 

[00zx9jjb]

I'm getting closer, it keeps running now. I'll tune it tomorrow.
The crank bearings were stuck, carb all gummed up, fuel tank all gummed up. Had to fix electronics, but the drive shafts and gears seem good. Should be a keeper.

 

[saddlehorse]

Good to hear. Glad you got it goin

 

[00zx9jjb]

Hey saddlehorse,, have you run your revo on a track. I run my revo 2.5 and 3.3 on different tracks and that truck rocked.

 

[saddlehorse]

Not yet. Have to rebuild my shocks first, have 2 that leak oil out bad so she doesn't handle to well right now.

 

[00zx9jjb]

I might have some shock kits still, let me know, i can mail them to you.

 

[saddlehorse]

What you got and a price?