EZ-start problem 2

[Mike c.]

Well, I went to the lhs for a new moter and at the the time all they had was a freebe moter that worked, but it didn't have the gear on it. can anyone tell me how I cand take the old gear off the other moter and on the new one? thanks

 

[RaCinJason399]

it should be able to be pulled right off.... with a pair of plires.

 

[Mike c.]

nope didn't worked i pulled the whole shaft out of the moter

 

[maxxtrac]

those gears are probably pressed on with a press. you will probably have to make some kind of home made press to press it off the old shaft and then press it on the new shaft. you could use a vise and a hammer if you have one

 

[Mike c.]

Originally posted by maxxtrac
you could use a vise and a hammer if you have one

I did that and the shaft wasn't long enuff and strip the whole thing so i am just gonna get a new starter

 

[x_789]

Mike you break more sheit than El it seems like X

 

[Mike c.]

thats most likely true

 

[nitroveins]

:jester:

 

[El Pirata]

Originally posted by x_789
Mike you break more sheit than El it seems like X

I seriously doubt that!!!