Errrr Screw this....Help me out rs4 people

[Waste Land]

Okay this is a .15fe and i just put it back on ym RS4. I attached the carb and the head and the exhaust bu I still have to random screw that i can't find out what they go to. Its really pissin me off. Sorry i dont have my camera to take pics of them. Anytoher places u guys know they could go. I tookt he engein off the car and then a week later i rebuilt it. I pulled the exhaust,head,carb. I can't find what the last two identical bolts go to. They have a very small and shallow phillips head. About 1/2 inch long. Anyone help me, errrrrrr....I've looked over and over that damn manual and the negine has all the screws it need but where do these go then...I'm about to start a riot

 

[hdurr1]

Are you sure that every hole in the engine has a screw in it? My guess is possibly the back plate of the engine, or it could have come from the chassis when you were taking off the engine. Hope this helps.
Hap

 

[highflyin]

If they are 1/2 inch long it could be the head bolts.

 

[jon2]

This really sounds like the screws to the pull strter oeven the backplate. Have you ran this mill yet since taking it apart. I had this ride before I got a NTC3. I would refer to the manual just to see. If this is the RTR 3 (not EVO) then it should have a very detailed description and pictures of each part. Good luck!!

 

[Waste Land]

Well i took my motor apart in my room and 2 head bolts were striped so i just cut them out and bought some more. well when my car was puttogether i used all new head bolts and had 2 left so I'm good. I'm breaking it in right now. Just idled its first tank...I'm so proud, lol Thanx for all the help guys

 

[jon2]

Good to hear. I was going to suggest the head bolts but you never said you bought more. So on any note I am glad to hear you got it right!!!

 

[joneser4u]

good luck!!!!!