Drive shaft angle

[hulkmaxx]

Just posting this because I'm not sure. After installing the Gmade axles on my scx10 I have been wondering if I have to much angle on my front and rear drive shafts. I took a couple pics sorry for the poor quality but I think you can still make out what I'm talking about. What do tyou guys think. I took it out for some trailing and didn't notice any binding or any other problems just thought I would see what you guys think. The front and rear are about the same angle. the do not bind what so ever either.

View attachment 13216

 

[rollinlow]

put some spacers in the top linked with roll the axle up some to help with the angle of the shafts

 

[HPIguy]

put some spacers in the top linked with roll the axle up some to help with the angle of the shafts

^^+1, I'd rotate those puppies to try and get the pinion angle to be less severe.

 

[hulkmaxx]

Yah I got the axle rotated up some. Those Gmade axle Truss I purchased are nice made the adjustments easy. Just had to move the links some and it rolled the axles right where they should be. If the rain holds off I may get to do a small trail run Tuesday I hope.