Differential gear on pan car question

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

al solbo

RC Newbie
Messages
7
Reaction score
4
Hello fellow RC folks. I just purchased a 1/12 scale Kyosho Buick stocker roller on ebay (cheap enough).This is the car below. The drive gear has a few broken teeth and needs replacing but I can't find it ANYWHERE... I tried all brands.. the gear itself has little 3 little gears in it and is capped by 2 beveled gears one for axle and other on wheel if that makes any sense..it comes off so I was thinking just replace the gear..no chance cuz I can't tell by pictures if anything will work other than finding the exact gear it came with...Anybody out there who can help me out with this now frustrating predicament and I end up tossing it in the trash?...
 

Attachments

  • Stocker 1.jpg
    Stocker 1.jpg
    276.1 KB · Views: 117
  • stocker 2.jpg
    stocker 2.jpg
    241.5 KB · Views: 75
  • Stocker 3.jpg
    Stocker 3.jpg
    297.6 KB · Views: 78
  • Stocker.jpg
    Stocker.jpg
    258.9 KB · Views: 73
Old kyosho stuff is hard to find. I have 2 Rc10L and no problem finding parts. Just tires.
 
get some measurements on paper. and take a look here might be able to make something work..
RJ Speed
axel dia. with length to hubs .
height off chassis
distance of front plate to 1st touch of axel.
how will I mount a wheel to this when complete?
 
Back
Top