• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Diff OIL

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
i noticed ahow thick and messy the grease was in the first front diff i did. it went smoothly and i got all the grease out with break cleaner. now i have to do the back.
 
Yeah i agree leave them unasembled but o well, i thin kthey should leave every thing un assembled the only thing i would want to be assembled would be the tranny but if it wasn't i think that would be ok too o well.
 
I just got done doing the 4 and 5 th tank Wow Power 6th tank it was pulling wheeles .and is still rich as hell running 200 230 F

One more thing when you get to the 5th tank give the lsn 1/8th of a turn in and the hsn 1/4 turn this will help a lot!
 
Last edited:
nice! It keeps raing here. DAMN THE RAIN!!
 
I forgot to say the duel disk break set up damm watch out how hard you hit them you will wind up on your lid LOL

Up date 7 and 8th tank I had to richen the LSN so I could keep the front on the ground. this .28 will flip the savy over as soon as you blip the throtle
 
That sounds Freaking cool!. i need to see a new savage 28 in action still. I want to see how it will fend up against a modded 25
 
OH ya I do need to say I did switch out the spur gear from the 49T to the 48T
 
Last edited:
nice to hear. it's been raining like a cow pissin on a flat rock here and doesn't plan on letting up for another 3 days. scored me some progressive suspension 3.75"inch piggyback shocks. I'm only getting four of them though to go with the nova towers. what weight oil should i use in these? 60wt?
 
arawak420 said:
nice to hear. it's been raining like a cow pissin on a flat rock here and doesn't plan on letting up for another 3 days. scored me some progressive suspension 3.75"inch piggyback shocks. I'm only getting four of them though to go with the nova towers. what weight oil should i use in these? 60wt?
Click to expand...
Running 4 only I whould try 40 to start with 1 hole pistons and go from there
 
If I had 8 I whould still start with 40 wt with 2 hole pistons
 
do i position them in the hole where the triangle ends? like i see most shocks set-up that are small with these towers?will i need stand offs?
 

RC Builds

Back
Top