Dam! Wrong Crankshaft

[alx]

Crappp!

My new OS .18 CVR - X doesn't have the standard length crankshaft on it.. Is there anyway just to change the crank without buying a new motor entirely...

this sucks.. :violin:

Ok.. So I know now it can be replaced for around 40$!! ugh So i need to know which crankshaft to buy..

I think its either OSMG4455 or OSMG4465

Any help?

 

[NCNitro]

Well I'm guessing you bought the OS .18 CVR-X(s), which has a short crank for use in a T-Maxx or AE RC10GT. So if you need a standard length crankshaft, according to this, you need the 21812100 crankshaft. What vehicle are you putting this engine in?

 

[alx]

This is going into a Nitro RS4 the first one.. I've got the engine mounts and all I just fudged up on the crankshaft size, I know how to replace it now I just need to know which one..
Thanks Guys

Its gotta be one of these 2..
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGMM2&P=
or
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGMN5&P=

This looks like the one you have in that picture there, If this is it i always prefer buying through ebay.. much easyer.
http://cgi.ebay.com/O-S-Crankshaft-...ryZ44028QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

 

[markallen]

The RS4 needs the full length threaded crank like the number NC gave you.The Ebay link is a bumpstart crankshaft.Here's the one you need.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGMN5&P=Z

Mark

 

[alx]

Thank you guys so much you guys are such a great help, always there to save my %&$*ups haha

Thanks Again,
Alex