Bigmaxx
RCTalk Qualifier
I have a savage 25, an was looking for parts for it, didn't see savage 25 in many of the parts list but seen more 4.6,an ss more than any. My question is what truck parts will fit compatiable on a savage 25?
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
Compatible parts
- Thread starter Bigmaxx
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
MudSlinger33
Hardcore RCTalk User
Check out the stickies at the top of the Savage page.Fast Eddy wrote a savage parts compatibility list, its very helpful.
Sent from my XT907
Sent from my XT907
Last edited:
Alexander_0_1
"Roads, where we're going we don't need roads"
The savage I'm bashing now was a savage 25, I put a bunch of savage x parts on it
Last edited:
mxrider076
RCTalk Member
i like your suspension! what you running?
Alexander_0_1
"Roads, where we're going we don't need roads"
Thanks I got the idea from dreammachines, and snook man, they are hot bodies aluminum savage x shocks, with fuel tubing spacers inside the oil chambers, I just wanted the ride hight lower, just to see what it was like, all the aluminum is from golden horizon hobbies.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
If you can find a set that doesn't need fuel spacers let me know
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
If you can find a set that doesn't need fuel spacers let me know
Alexander_0_1
"Roads, where we're going we don't need roads"
If you do this be prepared to have a stiffer ride, but the truck definitely tips way less
I only have about 15-25mm of travel, I'm using 70wt shock oil the pistons have three holes, the springs came with the hot bodies shocks, I'm using savage x shock spacers (plastic C clip) I hasn't bottomed out yet. The bottom spring retainer and bottom bolt hole are from savage x shocks (the hot bodies ones are a hard plastic IMO it's kinda brittle)
I only have about 15-25mm of travel, I'm using 70wt shock oil the pistons have three holes, the springs came with the hot bodies shocks, I'm using savage x shock spacers (plastic C clip) I hasn't bottomed out yet. The bottom spring retainer and bottom bolt hole are from savage x shocks (the hot bodies ones are a hard plastic IMO it's kinda brittle)