Clone dlux transmission

[TeknoJ]

I’m wondering if anyone has seen one of these in action? I’m curious if the driveshaft outputs rotate in opposite directions to reduce torque twist.
https://www.amazon.com/gp/product/B0CZ3LGGTP/ref=ox_sc_saved_title_8?smid=A1NJ0IAFBQIDF&psc=1

Here’s a photo so you don’t have to click the link.

 

[Tunedfrog]

Looks interesting.

 

[WickedFog]

I think they rotate the same way. Just a hunch.

 

[TeknoJ]

I think they rotate the same way. Just a hunch.

It better fricken not. I ordered one. Don’t you jinx this Mr fog

 

[TeknoJ]

This is the OD-3 transmission. All the shafts rotate in the same direction, one of them has an overdrive of 18%.

 

[TeknoJ]

I attempted to put this in my Injora rock buggy, but the mounting holes do not line up nor can I drill new ones. I need a blank skid. The next obstacle might be fitting a motor in there since it is currently equipped with a Holmes Puller Pro standard. This trans was built for an outrunner I believe, which might be the direction I take this build. There's not much room for electronics in this chassis.
The transmission itself looks like a solid knock off and good quality. Everything rotates smoothly. Technically it has 3 output shafts, 2 spin at the same speed and one has some underdrive. Not bad for $30 considering the real thing is $150 or something outrageous like that.