clod wheels

[scavind]

I dont know if this should be in a clod section but it's about my e-maxx. I see these wheels on rc4wd-
http://www.rc4wdstore.com/2/product_info.php?cPath=18&products_id=927
They say that they will fit onto clod buster wheels. Do any of you know if clod busters use wheels hexs? If so what size because i'm thinking about saving up to buy them. Check my other thread for my other question

 

[2revo1maxx]

You could probably look on tamiya's site they should have the info there.

 

[NCNitro]

No, the Clod wheel is held to a plastic hub with five studs in it, that lock in to the back of the wheel once you tighten down the center nut. The hub is attached to the axle however by way of a 12mm hex. So it is easy to use Savage or Maxx rims using a 12-14mm adapter and eliminating the hub, but it does not work in reverse to use Clod wheels on a Savage or Maxx unfortinately.

 

[durwank]

If you want some big tires with this tread pattern then these will work.
http://www.imexrc.com/servlet/the-Tires-cln-Jumbo-Truck-Tires/Categories
You have to use these wheels though.
http://www.imexrc.com/servlet/the-191/IMEX-DIAMOND-CHROME-RIMS/Detail
The only thing you will want to check on is the size of the hex. I think that the newer E-Maxx has a bigger size than this. You can always buy the hex you need though.

Or you could use these.
http://www.prolineracing.com/products/Masher_3_8_40_Series_All_Terrain_Tires-22-80.html
I personally think that these wheels are about as ugly as they can be but you might have different tastes.

Or you could use these wheels with any of Prolines 40 series of tires.
http://www.axialracing.com/details.php?Id=3297

 

[hardmikke6996]

if you want the clod rubber on ur t maxx its hard but i put a set on mine just took some few choice words and some prying they look pretty good on my maxx rims to.