Cleaning

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

*madmaxx3.3*

RCTalk Rookie
Messages
18
Reaction score
0
RC Driving Style
  1. Bashing
I'm sorry if this is the wrong place to post this but how do you clean a dirt/ oil stained emaxx 16.8 v chassis? Thanks
 
Simple Green, an old toothbrush, and compressed air.
 
Depends on how thoroughly you want it cleaned. If you want it looking brand new Id do a complete tear down and clean every piece as you go. If you just wanna get it 85% clean the Aliens suggestion works fairly well for the spot you can get to without taking it apart and that arent near electronics. You can also use CowRCs Moo-tor cleaner and compressed air (may need some use of a tooth brush) or denatured alcohol and compressed air (again may require some use of a tooth brush). Both of the last two options are electronics safe.

If its been quite awhile since youve done a complete teardown and cleaning of your kit or if youve never done it I would highly recommend doing it periodically so you can make sure all of your bearings are good and you can also check for cracked or broken pieces, missing screws, and any other problem areas you may have.
 

Similar threads

Back
Top