• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Sold / Found Cleaning out the garage sale

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.

sweetdiesel

aka SouRGassssssss
Supporter
Messages
5,948
Reaction score
1
Points
0
Location
Felton
RC Driving Style
  1. Bashing
  2. Racing
I'll be adding items to this list frequently so check back often. All prices include shipping. A portion of sales will go towards a side of stuffing for RCNT. Pictures will be added tonight.


NIB Peak Racing Diablo .12 with SG shaft, rear exhaust, non pullstart and slide carb. Comes with a glow plug, exhaust gasket, collet and shim. I originally purchased this engine to learn how to drive my R40, but the height of the carb is too low to clear the upper chassis plate. There is a small nick on the front engine casing from removing the flywheel. SOLD

e7370816.webp

da4ae5a2.webp


New APC Travelpower laptop briefcase for 15" screens. Made of black synthetic leather material and has provisions for APCs travel power system. Never had a chance to use this one, it's been sitting and gathering dust on my shelf. GONE LIKE THE WIND

b37dcecb.webp


Qty 4- HPI Savage 4 gear diffs, newly rebuilt with your choice of diff oil. I have 1,3,5,7, and 100K fluid to choose from. Diff cups have updated threaded screws. $25 each


2 Stock Savage SS 4.6 wheels. I got these used from Zandor, tires have been removed, these would make great spares. $8

2 Truckzilla rear dogbones $7 ea. both for SOLD

2 shoe flywheel with shoes, $7

RC Solutions shock towers for Savage- 1 pair for $25

Ofna/Picco Med temp glowplug $4

Hot Shot 2 long glow ignitor with wall charger SOLD

Mini Momo steering wheel for Futaba radios $6

Linksys WRT54GS Wireless G router SOLD

fbb676c9.webp


5f9d6598.webp


Linksys Wireless B Gaming Adapter WGA11B $30

NIP Associated RC10GT Airfilter SOLD!

NIP Alpine Remote for car stereos, works with most decks with remote capability SOLD

Sony Playstation 2 DVD Remote $13

DSC_0654.webp



Also taking offers.
 
Last edited:
Hey bud.. I'll take the Hot Shot 2, I think the dog bones, and if that wireless router will work with the card I have in my comp, I want that too.. I havent forgot about the files for ya either...
 
The router works with both wireless B and G cards. LMK when you can meet up.
 
Sweet...

If Skip bails on the router or finds out it won't work with his gear I'd like to be put next in line for it.

Thanks...

BTW, are those Savage towers for stock shocks or someother setup?
 
These towers will work with any stock length Savage shock, but are designed to be used in conjunction with the RC Solutions roll cage. They do not have provisions for a body mount, since most of the RCS cage users use the mounts that are stamped into the cage. I should add that these were originally purple, but were deanodized with greased lightning with metal polish applied afterwards.

You are third in line for the router, nitro_freak1 is behind SKIP.
 
Yea I could meet up on saturday... Or I might be going to RC Unlimited tonight...
 
More items added, check it out!
 
Here is a close up shot of the remote, it is brand new. Still has the original unused battery.

DSC_0012.webp


More info here

http://www.alpine-usa.com/

If this doesn't work with your Alpine head unit, I will give you a full refund.
 
you want to set up a time bud...? I have dinner with the folks but I have later tonight and anytime this week...? Sorry to not be in contact with ya...
 
Hey shadey,

I'll tell ya the same thing I've told others about this mill. The engine has never seen a drop of fuel. I had mounted my R40 clutch to it, mounted it to the car, and then realized it does not clear the upper deck. Carb sits too low and I didn't want to cut a slot out of the graphite just to make it clear. When I removed the flywheel I put a small nick in the front of the engine casing. In the second pic you can see the nick. Manufacturer stats are 1.25 hp and 34,600 RPM. Most everyone knows by now to take the manufacturer claims with a grain of salt.

https://www.ssl-stormerhobbies.com/...c=ns&pn=PEK6002

I have no experience with this mill, I bought it when I got my R40 as a learning engine. I was hoping to practice with it in the winter until next years racing season starts.
If you buy the engine I can throw in the Associated air filter for an aditional $5. It is a K&N style canister with an oilable prefilter and is new in package.
 
bump it up, new items to be added this week once I get them cleaned up. There will be 3 vehicles. :)
 
Sorry no vehicles up for sale, I decided to keep all my kiddies.

Bump it up!
 
Last bump, all proceeds from the rest of the items for sale will go to RCNT. Thanks for looking!
 
Status
Not open for further replies.
Back
Top