Carisma Camper W.I.P

[Oggydoggy'n'doggydaddy]

I know some might have interest this was my 1:10 carisma trail crawler"coyote" cut the body up made it a coe "kinda looks like a cut 60s ecoline ford " made a camper for it and it will be my sons 1:10 crawler with fully interactive camper . i will be rocking a scx10-3 brushless flight motor brushless crawler system 2s 5500 lipo either a 2000s ram body with a slide in camper or a titan body havent decided yet.
But the carisma camper listed goes

Battery:5500 2s 35c
Electronics: stock
Motor: stock
Steering: upgraded to aluminum links from plastic stock servo
Chassis: stock other then trees removed and super mags hotglued in
Wheel: stock(upgrading to steel wags and bfgoods)
Lights: eventually 16 which will be powered by the solar panel and 18650 2500mah battery including an interior light and door lamp that will have switches on the faux wall inside
Body: chopped like mad camper is polyboard and resin with shirt as cloth popsicle sticks for interior walls and drawer mat for "vynil" floors. Has a bed and counter Will have a bench table and cabinets
The camper contains pockets in the floor that hold 1.2 lbs of kinetic sand to keep the mass upright total project is about 13.7lbs

 

[Tunedfrog]

Very creative and very cool. You should jump over to your profile page and grab yourself a build thread banner.

 

[Oggydoggy'n'doggydaddy]

Some images i missed one is before i started oh yeah and i started this project due to being temporarily disabled as you can see

 

[RET4RD]

Some images i missed one is before i started oh yeah and i started this project due to being temporarily disabled as you can see

View attachment 149683

View attachment 149687

View attachment 149688

View attachment 149690

View attachment 149692

View attachment 149693

View attachment 149694

I want to put those sausage fingers on the grill. Very cool build.

 

[Doom!]

Love seeing customs, always cool to make something unique.

 

[Oggydoggy'n'doggydaddy]

I got a jay leno complex with my builds...its got to be unique or rare and dont ask to buy it

Love seeing customs, always cool to make something unique.

I think my next 1:10 will end up being a 2000s Tacoma or a titan with a flatbed with sideboxes and roller bars "explaining" i plan on a winch and spring loaded roller bars that will slide in and out of the bed via the winch with a hook that will grab a replica jayco slidein out of aluminum that will nestle itself right between the bedboxes (wont be interactive like my kids) i could use the. Ramp for other thinks like 1:24 or 1:14-16 fourwheelers or sideby side builds