Carby & O-ring help.

[Jamie0886]

Hi All,

Having idling issues with my Inferno Gx-21 motor. I have Narrowed it down to the carby. I have purchased a new O-ring kit for HSN & LSN, actually i have bought two because i keep breaking the new O-rings.

Just wondering if anyone has good tips on putting on new O-rings on needles.

One other thing, when re-assembling the high speed needle i struggle lining up the the hole on the part the fuel line connects to, with the hole on the high speed needle body. Any tips on that one too would be appreciated.

Thanks in advance

 

[robmob]

Coat the o-rings in Green Slime before installing.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSF70&P=ML

 

[Macguyver]

One other thing, when re-assembling the high speed needle i struggle lining up the the hole on the part the fuel line connects to, with the hole on the high speed needle body. Any tips on that one too would be appreciated.

Thanks in advance

you dont need to line them up ...the part that the fuel line hooks up to ..has a groove inside ..so when on the needle housing , the fuel flows all around the housing and reaches the holes

 

[Jamie0886]

you dont need to line them up ...the part that the fuel line hooks up to ..has a groove inside ..so when on the needle housing , the fuel flows all around the housing and reaches the holes

Ah thanks heaps for clarifying that. I THOUGHT thats how it might work, but didn't really have a clue lol.

Cheers.

 

[Macguyver]

no prob glad i could help