• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

? Carb Settings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
D

defective4x4_1

RC Newbie
Messages
8
Reaction score
0
Points
0
RC Driving Style
i just put a 2.5 motor in a 15 tmaxx.I just need to know what the factory setting was.I got the motor from florida and I'm in jersey so it needs to be tuned.I can get it running but it gets hot quickly.Any help would be great.Thanx
 
HSN needs to be 4 turns out and LSN needs to be set flush with the inside housing of the carb. hope that helps.
 
That's the basic factory setting. If it's already broken in, set it there and then start leaning the LSN once it's warmed up, till you get a good take off. At WOT, you'll need to start leaning the HSN.
 

RC Builds

Back
Top