Brushed buggy advice needed

[matteal1984]

Hi all, I've recently purchased a cheap 1/18 buggy to mess around with my friend, it currently comes with a 7.4v li-on battery but I'm not keen on the run time, if I purchase a 7.4v 2s lipo polymer 30c battery will the system handle it as I know they have a bit more punch than the li-on? Its a cheap wltoys buggy(50 buck job) it has a 60A ESC and 390 brushed motor currently installed.

Any advice is greatly appreciated
Thanks.

 

[WickedFog]

Yeah, it will handle a 2s lipo just fine.

 

[matteal1984]

Thanks!

Yeah, it will handle a 2s lipo just fine.

Thanks!

 

[tntpoof]

I would go with a bigger C rate than 30c

 

[Greywolf74]

Hi all, I've recently purchased a cheap 1/18 buggy to mess around with my friend, it currently comes with a 7.4v li-on battery but I'm not keen on the run time, if I purchase a 7.4v 2s lipo polymer 30c battery will the system handle it as I know they have a bit more punch than the li-on? Its a cheap wltoys buggy(50 buck job) it has a 60A ESC and 390 brushed motor currently installed.

Any advice is greatly appreciated
Thanks.

Order a LiPo with the highest mAh that will fit in the kit.

I would go with a bigger C rate than 30c

No need on a 1/18 scale RC