Body hole size

[acerblue]

Hey I dont have the tool I need to put holes in my body... what other methods can I use?

I would imagine a drill would work, but that brings up the question of what size drill bit for the revo body posts?

 

[MotoGod]

I use a drill. Just match the drill bit to the size of your body post...just make sure the bit is a tad larger than the post, but not too much. Or use a same size bit and swirl it around a bit.

A dremel tool with the conical grinder tip works well too. The more you push it in...the bigger the hole gets....so you can fine tune it pretty easily. Body Reamers still work best though ;-)

 

[SteelCityNitro]

I've been using a drill and a uni-bit to makes holes in my bodies... i used regular bits as well and they work just fine, but it seems like I make a cleaner hole with the uni-bits

 

[Scrogg]

Deans foam body washers are a good way to prolong the life of your new bodies for a few bucks. I highly recommend them. I just thought I'd throw that out there if anyone does not know about them. They fit perfect on the Revo body posts or you can stick them to the body.