Well, after transferring all my stuff over to the Flip FPV frame, I had a frame doing nothing. A good friend of mine found this out, and sent me an Openpilot CC3D board!! These things are really hard to come by, and I'm stunned at that kind of generosity to say the least. I already had my old motors too, so I bought the other stuff I needed to build a basher / aerobatic quad. This thing will get beat on like it owes me money, no plans for any FPV gear on this one currently, LOS flight only.
Parts list:
Openpilot CC3D flight controller housed in a kauaicuda case
DJI 2212 920kv motors
Flycolor 30A ESCs flashed with SimonK firmware
APC 10x4.7 props
DJI F450 frame
FRsky 2.4 radio RX
3s 2200mah packs
Should be flying tomorrow since it's a more simple build
Parts list:
Openpilot CC3D flight controller housed in a kauaicuda case
DJI 2212 920kv motors
Flycolor 30A ESCs flashed with SimonK firmware
APC 10x4.7 props
DJI F450 frame
FRsky 2.4 radio RX
3s 2200mah packs
Should be flying tomorrow since it's a more simple build