hipluther01
RCTalk Addict
What a s%^&y day. First i got out my maxx, stripped the spur gear to the point it wont run. Then I got out my rc 10 gt, finally got it running. It was packing the front wheels across the yard and smacked a tree throwing the wheel off and losing a bearing. I found an extra bearing and went to put the wheel back on and the pilot shaft on the steering knuckle broke off. Well I then put on my extra spur gear on my maxx only to find out it wont work because in the middle it has a raised area that looks as if the slipper clutch should go inside of it and it dont. Upon finding that out I noticed my CB was loose. I took off the motor to find out BOTH bearings, inner and outer, on the CB were completely shot. I have 2 bearing that will work, but at this point I'm just pissed off and dont care! 