axial .32

[TOPDOGG71]

picked up a brand new axial .32 for $75.00 today did i get a deal or did i get !@#&**:constipat

 

[4u2nv]

Howd you manage that? Thats a very good deal.

 

[SMaxxin]

Thats a smokin deal!!!

 

[TOPDOGG71]

friend of a friend type thing so its a good mill

 

[SMaxxin]

friend of a friend type thing so its a good mill

I have an Axial .28 in my Savage and it has been great so far...Check out my post in the power plant forum.

 

[HeartBreak]

Sounds like you got a heck of a great deal. 70 bucks for an Axial is nothing short of awesome.

 

[TOPDOGG71]

well iit sounds like i got a deal that is a good thing any tips on the install (better clutches bell gears.etc) it has really good instructions on break in but i am up for tips on that to

 

[SMaxxin]

well iit sounds like i got a deal that is a good thing any tips on the install (better clutches bell gears.etc) it has really good instructions on break in but i am up for tips on that to

I didn't like the break in instructions on the Axial, they say two tanks at idle...not very good IMO. I suggest looking into the heat cycle, the instructions are very easy.

https://www.rcnitrotalk.com/forum/showthread.php?t=42716&highlight=heat+cycle

 

[HeartBreak]

With the Savage, reduce the idling to one tank, or follow the heat cycle method. I went by the book on my F4.1 and it's running fine. I did one idle tank to loosen it up before putting any load on it. Then it was two tanks fairly easy, two somewhat middle of the road, and two just barely getting into full throttle, before starting to lean it down.

It flat-out rips. I'm sure your Axial will have the truck on its' lid with zero effort.

 

[SMaxxin]

I'm sure your Axial will have the truck on its' lid with zero effort.

LOL thats an understatement! You better have your slipper adjusted properly or the diffs won't last long. I like my slipper tight, my rear diff lasted for around a quart of fuel...And thats with the .28

 

[TOPDOGG71]

thats how i did my 4.1 as well (by the book) can't weight to see how much stronger it is over my stocker

 

[Racer 1966]

If you put that on a Savage, you'll find out where all the weak points are. My buddy put an OS .30 on his, went from dependable basher to constant parts replacements.
Wish I could find a .28 that cheap, great buy!

Better have a good wheelie bar, that's about all you're gonna be doing!

 

[TOPDOGG71]

i have some alum "more weight" hope i have the right alum stuff or its back to the work bench

 

[hamz9561]

I hope you've been looking in rear-view mirror for flashing red lights. That was a steal!

 

[HeartBreak]

thats how i did my 4.1 as well (by the book) can't weight to see how much stronger it is over my stocker

It's absolutely insane compared to the S25. Wheelies on demand, and if your brakes are too tight, forward cartwheels.