Avatar Bicopter wiring

[Jonni13]

Good day, I would like to ask if there is an rc modeler who would be able to help me a bit. I want to print a bicopter from the scorpion avatar, and I would need to know how to connect 2 esc and 2 servos to the flight controller and which flight controller to choose. Thanks in advance for the info.

 

[tntpoof]

its a 6 ch 2 axis chopter good luck..can be done thru a correct flight controller
https://usa.banggood.com/KY-Z2-6CH-..._id=&msclkid=9c08b584ba6f171802b2d000cf680e13

 

[Jonni13]

its a 6 ch 2 axis chopter good luck..can be done thru a correct flight controller
https://usa.banggood.com/KY-Z2-6CH-..._id=&msclkid=9c08b584ba6f171802b2d000cf680e13

I don't want to buy the finished model, but I want to have it printed on a 3d printer with my own parameters, I would need to know how to connect 2xESC and 2x servo to the flight controller betaflight Beerotor F3

 

[tntpoof]

https://www.rcgroups.com/forums/sho...Controller-(integrated-OSD)-Discussion-Thread

manual listed that should give you some pointers. not sure what you want to do with servos so I can't direct you to exact answer.