Anyone do custom CNC work?

[rcnut143]

Hey guys. I need a plate with the Hull Identification Number cut in to it for my boat. Can anyone do this for me cheap? Letters are 1/4in tall and there are 12 characters of them. Doesn't need to be super thick or shiny and fancy.

 

[abadk9420]

You might just get a piece of aluminum and stamp or etch the numbers into it, my local hardware store has stamps they use for marking keys for people not sure if they are a 1/4" tall or not though, but one good strike with a hammer and the number or letter is there.

 

[Rolex]

Any store that deals with plaques or trophies can do a CNC engraving on a brass plaque. Any size, any font, and in brass, which you'll need on a boat.

 

[rcnut143]

thanks guys. I'll look into those ideas.

 

[Racer 1966]

I can help you out if you still can't find what you want.

 

[NCNitro]

I can help you out if you still can't find what you want.

Racer1966 does amazing cnc work! I would highly recommend Randy.

 

[rcnut143]

If I can't get what I want I'll be sure to contact you.

 

[psunitro]

Would a vibro-etcher work for what you want?